上行下效是什么意思| 4月26日什么星座| 再生牙技术什么时候能实现| 走路不稳是什么原因| 眼睛肿是什么原因| 人怕出名猪怕壮是什么生肖| ppe是什么| vana是什么牌子| 什么人不适合种植牙| 苹果手机为什么充不进去电| 肛门是什么意思| 为什么会长白头发| 白血病是什么症状| 岱是什么意思| 泡热水脚有什么好处| 宝宝消化不良吃什么| 极有家是什么意思| 灰什么丧什么| 李姓男孩起什么名字好| 清醒的反义词是什么| 智齿疼吃什么药| 麻疹是什么症状| 刚做了人流适合吃什么好| 念珠菌性阴道炎用什么药| tga是什么意思| 胆固醇高是什么引起的| 全程c反应蛋白高说明什么| 手汗症挂什么科| 五行什么克金| 容易做梦是什么原因引起的| 鸡胸是什么病| 黄宗洛黄海波什么关系| 东成西就是什么生肖| 行运是什么意思| 什么食物维生素A含量高| 什么是肾功能不全| 什么叫基因检测| 溯溪是什么意思| 寿元是什么意思| 圣诞是什么意思| o型血为什么招蚊子| 虎父无犬子是什么意思| 尿毒症小便什么颜色| 小肠火吃什么药效果快| 叶黄素对眼睛有什么好处| 过午不食是什么意思| 拍大腿内侧有什么好处| 手指发痒是什么原因| 养神经吃什么食物最好| 脚肿什么病| 无济于事的济是什么意思| 拔牙后不能吃什么食物| 一什么景象| 野生葛根粉有什么功效| 气体交换受损与什么有关| 肚子胀什么原因| 毅力是什么意思| 痛风挂号什么科| 脂肪肝吃什么中成药| 甘油三脂是什么| 郁郁寡欢什么意思| ca199是什么检查项目| 小腹痛挂什么科| 咽喉炎吃什么消炎药| 法务是干什么的| 1222是什么星座| 什么火没有烟| 二月初四是什么星座| 涟漪什么意思| 人为什么会抑郁| 姨妈期间不能吃什么| 女人吃藕有什么好处| 6月23日是什么日子| 冷宫是什么意思| 恃势之刑是什么意思| 减肥期间能吃什么水果| 什么叫两会| 月经9天了还没干净是什么原因| 俊五行属什么| 女人脾虚吃什么药最好| 周期是什么意思| 漫反射是什么意思| 避孕套玻尿酸的作用是什么| 滨海新区有什么好玩的地方| 心脏早搏什么意思| 大象的天敌是什么动物| 什么叫艾滋病| 温开水冲服是什么意思| eb病毒igg抗体阳性是什么意思| 信必可为什么轻微哮喘不能用| 儿童水杯什么材质好| 孕妇拉的屎是黑色的是因为什么| 比干是什么神| 圣罗兰为什么叫杨树林| 改姓氏需要什么手续| 姨妈期吃什么水果| 一进门见到什么植物好| 掰弯了是什么意思| 交叉感染是什么意思| 无菌敷贴是干什么用的| 发生火灾时的正确做法是什么| 今天中午吃什么| 烹调是什么意思| 头顶一阵一阵疼是什么原因| 液基细胞学检查是什么| 羊肉和什么菜包饺子好吃| 倒睫是什么意思| 一直不射精是什么原因| 梦见挖坟墓预示什么| 脚磨破了涂什么药| 囟门闭合早有什么影响| 麦昆牌子是什么档次| 什么是brt| 餐标是什么意思| 扭转乾坤是什么生肖| 为什么一生气就胃疼| 氯雷他定片是什么药| 心理学是什么| 幽门螺旋杆菌感染是什么意思| 风热感冒吃什么药好| 涉嫌是什么意思| 风向标是什么意思| 早搏什么意思| 总出虚汗什么原因怎么解决| 一什么枣子| 知天命是什么意思| 唐僧念的紧箍咒是什么| 什么原因导致荨麻疹| 女性虚火旺吃什么下火| 宫寒是什么原因引起的如何调理| 英语四级什么时候报名| 五月十四号是什么情人节| 口气臭吃什么能改善| 梦见小孩子是什么意思| 高温中暑吃什么药| 七月二号是什么日子| 人参适合什么人吃| 双子座和什么座最配| 苏州机场叫什么名字| 天蝎女喜欢什么样的男生| 媚眼如丝是什么意思| 92年1月属什么生肖| 即视感是什么意思| 宝宝便秘吃什么食物好| 孕妇耻骨疼是什么原因| 盲人按摩有什么好处| 火龙果有什么好处| 腋毛有什么作用| 林彪为什么要叛逃| 属马的是什么星座| 第三者责任险是什么意思| 9月份什么星座| 在家无聊可以干什么| 市监狱长是什么级别| 小孩肺热吃什么好清肺热| 鹿茸是鹿的什么部位| 笙字五行属什么| 睾丸大是什么原因| 腹泻输液用什么药| 拉肚子吃什么好| 烟酰胺是什么东西| 鲸鱼属于什么类动物| 双向情感障碍是什么病| 藏红花的功效是什么| 肠道肿瘤有什么症状| 看山不是山看水不是水是什么意思| 甲状腺肿物是什么意思| 半梦半醒是什么意思| 为什么头发会变白| 黄绿色痰液是什么感染| 什么是肺气肿| 胎心停了是什么原因引起的| 为什么想吐却吐不出来| 土豆不能和什么食物一起吃| 阔以是什么意思| 皮肤感染吃什么消炎药| 阴茎疱疹用什么药| 2026属什么生肖| 4月1日什么星座| 孔雀女是什么意思| 忌作灶是什么意思| 膝盖缝里面疼什么原因| 过敏性鼻炎用什么药效果最好| 室上性心动过速是什么原因引起的| 奢靡是什么意思| 子宫内膜厚是什么意思| 专科和本科有什么区别| 手发抖吃什么药| 甲状腺饱满是什么意思| 什么是半衰期| 曲克芦丁片治什么病| 榴莲树长什么样子| 白眼球发黄是什么原因| 法会是什么意思| yrc是什么牌子的鞋| shuuemura是什么牌子| 买什么样的老花镜好| 女人喝蜂蜜水有什么好处| 减肥吃什么水果好| 脑白质是什么病| 吃什么助于长高| 拉缸是什么意思| 山楂什么季节成熟| 神机妙算是什么意思| 骨龄什么时候闭合| super是什么意思| 阿波罗是什么神| nt宝宝不配合说明什么| 圆是什么结构| 五味杂粮什么意思| 副乳是什么| 骨折和骨裂有什么区别| 兵员预征是什么意思| 肝内高回声什么意思| 晚上睡觉睡不着是什么原因| 格局什么意思| 长相厮守是什么意思| 什么叫肠化| 前列腺增生用什么药好| 目前除皱最好的方法是什么| 低筋面粉适合做什么| 女生胸部发育到什么年龄| 淋球菌是什么| 感冒头痛吃什么药| 鱼最喜欢吃什么| 共襄盛举是什么意思| 凤凰单丛茶属于什么茶| 免疫组化检查是什么| 丝瓜有什么营养| 疝气有什么症状| 胰腺炎挂什么科| 孩子张嘴睡觉是什么原因| 孕前检查挂什么科室| 眼色是什么意思| 打猎是什么意思| 三观不正是什么意思| 不排卵是什么原因造成| 红旗代表什么生肖| 梦见红薯是什么意思| 痰多吃什么药好| 结膜炎用什么眼药水效果好| 金针菇为什么不能消化| 宗师是什么意思| 五行缺土戴什么| 特务是什么| 垂询是什么意思| 县长属于什么级别| 香蕉与什么食物相克| 手上有湿疹是什么原因引起的| 经常感觉饿是什么原因| sds是什么意思| 早上起床头晕是什么原因| 三月十号是什么星座| 成吉思汗和忽必烈是什么关系| 琼字代表什么生肖| 肚子胀痛什么原因| 什么时候入秋| 天秤座是什么性格| 很能睡觉是什么原因| 新生儿屁多是什么原因| 吃什么东西养胃| blossom是什么意思| 播客是什么意思| 造影是什么意思| 百度
AC power supply wave with harmonics

北京到杭州将首次开行“复兴号” 全程4小时18分

百度 莫朗国际健康集团董事长ShaneMoran表示,中国健康产业发展潜力巨大,希望能将莫朗的运营模式和质量控制系统与绿地香港的资源平台优势相结合,针对中国养老市场的客观现状,探索出了一条以先进技术引导和国际顶级标准为规范的医养服务新模式,创建中国养老服务技术制高点,弥补中国高端养老市场的短缺,致力提高中国老年人的生活质量和幸福感。

Harmonics can be harmful for a transformer's operation. However, they can be mitigated by K-Factor rated transformers, Zigzag transformers, and other options.

August 9, 2022

Electronic innovation has opened the door for more efficient technology in today’s economy, such as renewable energy devices for wind and solar farms, large variable frequency drives (VFDs) for running motors, and the advanced electronic equipment used for mining cryptocurrency. Whether directly or indirectly, these devices are designed with optimal efficiency and performance in mind for the systems where they are used. This means lower power consumption and lower equipment operation costs, but this gain in efficiency comes with a unique set of challenges.

Most high-efficiency electronic devices produce what are known as harmonics. Left unchecked, harmonics can cause overloading, overheating, and loss of power in an electrical system—particularly at the transformer. In this article, we’ll take a look at four main questions about harmonics and transformers:

  • What are harmonics?
  • What causes harmonics?
  • How do harmonics affect transformers?
  • Which transformer design should you choose for systems with harmonics?


What Are Harmonics?

In a standard AC power supply, an electrical signal takes the shape of a sine wave. This is what the electric equipment at the end of the line consumes and uses to do work (powering lights, running motors, printing, running computer programs, etc.). Notice the even shape of the wave in the image below; each peak and crest has the same amplitude. In a 60-Hz system, this wave cycles up and down 60 times per second.

AC power supply wave

Now let’s take a look at the AC power supply from above (shown in orange below and referred to as the fundamental frequency) with harmonics added in.

Comparison of AC fundamental frequency to 3rd and 5th harmonic waves

The orange sine wave represents the AC power signal at 60 Hz moving through a transformer to a load (such as a motor). The two blue waves are harmonics. Notice that these harmonic waves are not congruent with the fundamental one at 60 Hz; they appear at higher frequencies. At 180 Hz, the 3rd harmonic is three times greater than the 60-Hz fundamental frequency, and at 300 Hz, the 5th harmonic is five times greater, meaning they cycle up and down 180 and 300 times per second respectively. Since harmonics are integer multiples of the fundamental frequency, they always appear at significantly higher frequencies in electrical systems.

What Causes Harmonics?

Linear and non-linear loads

In an electrical system, equipment consumes power linearly or nonlinearly. With linear loads, the consumption of power follows the same shape as the AC sine wave. If you think of the power supply like a sandwich, a linear load would eat the whole sandwich. Non-linear loads consume power in a way that does not follow the sinusoidal shape of the AC power supply (consuming certain portions of the wave shape at designated intervals). To use the sandwich analogy, non-linear loads may only consume a part of the sandwich, like the bun. Examples of linear loads would be motors or incandescent lighting. Examples of non-linear loads would be computers, electronic lighting ballasts, variable frequency drives, and fluorescent lighting. These non-linear loads and the particular manner in which they consume power produce harmonics.

As we discussed in the beginning, modern electronic equipment is designed to operate at a higher efficiency (meaning less power is wasted during operation). This is accomplished by what is known as use-based power consumption––the equipment automatically switches on for operation and then off again when it is not doing work. This on/off switching function introduces harmonics into the electrical circuit. Again, if we think of the AC power supply like a sandwich, electronic devices designed to operate only while in use will consume only parts of the sandwich. A lower amount of the total power supply is consumed, but the process required to do this produces a higher amount of harmonic content.

As the figures below show, any harmonic (3rd, 5th, 7th, etc.) present in the electrical system will become superimposed upon the fundamental 60-Hz frequency, creating a complex, non-sinusoidal waveform. This non-sinusoidal component must be accounted for when estimating load requirements and sizing transformers that supply power to large nonlinear devices. The more harmonic distortion present in the system, the more non-sinusoidal the load current.

Interaction of fundamental frequency and harmonics creates resultant non-sinusoidal waveform

How Do Harmonics Affect Transformers

Transformers are typically built for usual service conditions unless specified otherwise by the customer. Applications with a significant amount of non-sinusoidal load current (or harmonic distortion), fall into the category of unusual service conditions. This non-sinusoidal component puts greater stress on conductor insulation and increases winding and core losses at the transformer, resulting in excessive heat levels and loss of power. The overheating effects of high-frequency harmonics are observed mainly at the coils, core, and neutral conductor of the transformer.

Higher frequency currents (like harmonics) naturally move toward the outside of the winding conductor, which causes an increase in resistance and heat. This principle is known as the skin effect. The densely packed construction of the coils also adds to heat build-up at the windings, and the end result is a reduction in the total current-carrying capacity of the transformer’s conductors.

Higher frequency harmonics can have adverse effects on a transformer’s core as well. In an AC circuit, the polarity of the magnetizing current in the core switches back and forth with the direction of the applied current. In other words, the rate at which the magnetizing current in the core changes polarity is driven by the frequency of the applied current. If the frequency of a standard AC power supply is doubled from 60 Hz to 120 Hz, then the magnetizing current in the core will go from switching polarity 60 times per second to 120 times per second. The higher the rate of change in the magnetizing current, the greater the amount of heat loss in the core. These additional losses are known as hysteresis losses.

Some losses in the core are inherent to the design of the transformer. Small pockets of swirling current, known as eddy currents, are another source of heat loss in transformers. Efficient laminated core designs (like those produced today) will minimize eddy currents as much as possible. While these undesirable phenomena are not a byproduct of harmonics, their negative effects are increased exponentially with the introduction of such higher frequency currents. The presence of higher harmonic frequencies multiplies an eddy current’s adverse heating effects several times that of the normal 60 Hz frequency. If a transformer’s core is not designed for such conditions, the resulting increase in the unit’s operating temperature could be detrimental.

The third most common area of overheating in the transformer is the neutral conductor on wye-connected windings. With wye-connected systems, triplen harmonics (3rd, 9th, 15th, and so on) will be present. These particular frequencies are most often seen where transformers serve large single-phase loads. Any triplen harmonics present in one or more phases of the system will add together at the neutral conductor. These harmonics crowd together in the neutral and reduce its current-carrying capacity. If the amount of triplen harmonics is high enough, the neutral conductor will overheat and its insulation system will fail. For such cases, an oversized neutral is generally used.

Which Transformer Design Should You Choose for Systems with Harmonics?

Determining the level of harmonic content in an electrical system is the first step in selecting the correct transformer for a project where harmonics may pose a significant concern. There are electrical industry guides that define the maximum level of harmonic content (or distortion) allowed for transformers designed for usual service conditions (see IEEE 519). As a general rule of thumb, if the total harmonic distortion (THD) in the system is above 5%, you will need 1) a transformer built to handle the harmonic content or 2) a means of mitigating the presence of harmonics at the transformer. Below, we’ve outlined the available options for both solutions.

1. K-factor rated transformers

Most often referred to as drive-isolation transformers (because they’re used in applications with motor drives like VFDs), K-factor rated transformers are built to handle the additional stress imposed by harmonics. K-factor rated transformers do not filter or mitigate harmonic distortion, they simply withstand it. Think of a transformer with a K-factor like a punching bag—the bigger and heavier the bag, the more hits it will be able to withstand. In a similar way, the higher the K-factor rating on a transformer, the more harmonic distortion it will be able to handle.

A transformer built for usual service conditions has a K-1 rating (a K-factor of 1 means there is no harmonic distortion in the system). K-factor ratings go all the way up to 50, but it’s rare to see anything above K-20 in the commercial and industrial market. For most harmonic profiles, a K-4 rated unit is sufficient. K-factor rated units include a 200% rated neutral conductor for handling the addition of triplen harmonics (see page 3 of this paper for a more detailed description of triplen harmonics), as well as an electrostatic shield between the HV and LV windings. In addition to harmonics, the switching function of non-linear devices also produces potential switching transients (common in solar inverters), which can lead to voltage distortion on the load side and high-voltage spikes on the supply side of the transformer. An electrostatic shield reduces these power quality issues.

2. Zigzag transformers

Harmonic-mitigating (or zigzag) transformers (HMTs) do exactly what their name suggests: reduce the presence of harmonic currents in an electrical system. Unlike units designed with a K-factor rating, HMTs filter a portion of the harmonic content. The installation of a stand-alone HMT will reduce the amount of triplen harmonics (3rd, 9th, 15, etc.) present in a circuit. Installing an additional HMT on the same circuit with a -30 degree phase shift (when the first unit has a 0-degree phase shift, or vice versa) can further reduce the amount of 5th and 7th harmonics. This dual-unit phase shift method can also be accomplished with standard delta-wye transformers, but a zigzag winding offers a more economic solution. HMTs are generally used for systems that operate several non-linear loads.

3. Passive Harmonic Filters

In addition to K-factor rated and harmonic-mitigating transformers, Maddox also offers a passive harmonic filter, a combination of capacitors and reactors. A passive harmonic filter is used to reduce the harmonic current flowing through the main circuit pathway. It accomplishes this by providing a lower impedance path for the harmonic current to travel—the harmonic current is diverted away from the system’s bus, which, in turn, lowers the circuit impedance. Passive harmonic filters can be tuned for one or more particular harmonic frequencies in a given system, making them a more versatile solution than the HMT. Higher K-ratings for larger transformers can significantly increase the cost of a unit, so the passive harmonic filter may provide a more cost-effective solution. Diverting the harmonic current in the system away from the main current-carrying pathway allows for the installation of standard equipment throughout the circuit (including the distribution transformer).

4. Delta-wye transformers

For systems where only triplen harmonics are present, a standard delta-wye transformer may be a sufficient solution. As mentioned earlier, triplen harmonics often cause problems for the neutral conductor, but when a delta winding is present on the primary side of a two-winding transformer, the triplen harmonics will circulate inside the delta winding instead of the neutral conductor. If a study of the harmonic profile of a system shows that only 3rd, 9th, or 15th harmonics are significantly present, a standard delta-wye transformer will be a sufficient solution. A delta-wye transformer also eliminates the problem of zero sequence currents, which are characteristic of wye-wye connected windings. For this reason, delta-wye winding configurations are often favored for applications where the load may be unbalanced.

5. Oversizing standard distribution transformers

Another way to account for harmonic distortion in a system is to simply oversize the kVA of a standard transformer design. This is a quick and easy solution when it is not feasible to wait for a custom-built transformer from the factory with a designated K rating. For applications where the THD is minimal (K-4, for instance), a simple oversizing of the kVA—or establishing a derating factor—may work just fine.

Oversizing the transformer kVA will increase the size of the core, windings, and neutral conductor. If the harmonic content in a system reduces the capacity of the transformer by 20%, then the unit will need to be oversized accordingly. For example, if a 1,000 kVA transformer is only good for 80% of its nameplate rating, the derating factor would require oversizing the unit to at least 1,200 kVA. Applying a derating factor is more common with liquid-filled transformers, which are naturally better suited for handling harmonic distortion than dry-types. It’s more common to see harmonic distortion handled with K-factor ratings in dry-type transformers.

It is key to note there are certain special design considerations made when building K-rated transformers which are not included with standard designs, such as the electrostatic shield and 200% rated neutral. Also, K-rated transformers sometimes include specially shaped winding conductors to reduce the increase in heat and resistance from harmonics. If triplen harmonics can be effectively mitigated at the transformer with a delta winding (negating the need for the larger 200% rated neutral), and if there is no need for electrostatic shielding, applying a derating factor and oversizing the distribution transformer can be a simple and effective solution. For more information on this method, take a look at this article on sizing transformers for crypto mining.

We’re Here to Help

The topic of harmonics will continue to require attention wherever electronic innovation and non-linear loads make up a significant portion of the demand in electrical circuits. Without proper counter-measures, harmonic distortion can lead to costly repairs and replacement. Our goal at Maddox is to meet these growing demands in the electrical industry with transformers designed and built for such applications, ensuring peak performance and longevity of service on every project.

Maddox offers all five of the above solutions to ensure that you have access to the equipment you need, when you need it. If you have questions about harmonics or want to request a quote for a Maddox transformer, fill out the form below or give us a call at 1-800-270-2011.

?

Written by:
Ben Gulick & Mac Spiller
A Maddox Padmount transformer loaded on a truck and shipping out

Get in touch

Find out how Maddox can power on your next project.
Thank you!
Your submission has been received!
Oops! Something went wrong while submitting the form.
All Articles

Guide to transformer harmonics and k-factor

Harmonics can be harmful for a transformer's operation. However, they can be mitigated by K-Factor rated transformers, Zigzag transformers, and other options.

Written by:
Ben Gulick & Mac Spiller

August 9, 2022

AC power supply wave with harmonics

Electronic innovation has opened the door for more efficient technology in today’s economy, such as renewable energy devices for wind and solar farms, large variable frequency drives (VFDs) for running motors, and the advanced electronic equipment used for mining cryptocurrency. Whether directly or indirectly, these devices are designed with optimal efficiency and performance in mind for the systems where they are used. This means lower power consumption and lower equipment operation costs, but this gain in efficiency comes with a unique set of challenges.

Most high-efficiency electronic devices produce what are known as harmonics. Left unchecked, harmonics can cause overloading, overheating, and loss of power in an electrical system—particularly at the transformer. In this article, we’ll take a look at four main questions about harmonics and transformers:

  • What are harmonics?
  • What causes harmonics?
  • How do harmonics affect transformers?
  • Which transformer design should you choose for systems with harmonics?


What Are Harmonics?

In a standard AC power supply, an electrical signal takes the shape of a sine wave. This is what the electric equipment at the end of the line consumes and uses to do work (powering lights, running motors, printing, running computer programs, etc.). Notice the even shape of the wave in the image below; each peak and crest has the same amplitude. In a 60-Hz system, this wave cycles up and down 60 times per second.

AC power supply wave

Now let’s take a look at the AC power supply from above (shown in orange below and referred to as the fundamental frequency) with harmonics added in.

Comparison of AC fundamental frequency to 3rd and 5th harmonic waves

The orange sine wave represents the AC power signal at 60 Hz moving through a transformer to a load (such as a motor). The two blue waves are harmonics. Notice that these harmonic waves are not congruent with the fundamental one at 60 Hz; they appear at higher frequencies. At 180 Hz, the 3rd harmonic is three times greater than the 60-Hz fundamental frequency, and at 300 Hz, the 5th harmonic is five times greater, meaning they cycle up and down 180 and 300 times per second respectively. Since harmonics are integer multiples of the fundamental frequency, they always appear at significantly higher frequencies in electrical systems.

What Causes Harmonics?

Linear and non-linear loads

In an electrical system, equipment consumes power linearly or nonlinearly. With linear loads, the consumption of power follows the same shape as the AC sine wave. If you think of the power supply like a sandwich, a linear load would eat the whole sandwich. Non-linear loads consume power in a way that does not follow the sinusoidal shape of the AC power supply (consuming certain portions of the wave shape at designated intervals). To use the sandwich analogy, non-linear loads may only consume a part of the sandwich, like the bun. Examples of linear loads would be motors or incandescent lighting. Examples of non-linear loads would be computers, electronic lighting ballasts, variable frequency drives, and fluorescent lighting. These non-linear loads and the particular manner in which they consume power produce harmonics.

As we discussed in the beginning, modern electronic equipment is designed to operate at a higher efficiency (meaning less power is wasted during operation). This is accomplished by what is known as use-based power consumption––the equipment automatically switches on for operation and then off again when it is not doing work. This on/off switching function introduces harmonics into the electrical circuit. Again, if we think of the AC power supply like a sandwich, electronic devices designed to operate only while in use will consume only parts of the sandwich. A lower amount of the total power supply is consumed, but the process required to do this produces a higher amount of harmonic content.

As the figures below show, any harmonic (3rd, 5th, 7th, etc.) present in the electrical system will become superimposed upon the fundamental 60-Hz frequency, creating a complex, non-sinusoidal waveform. This non-sinusoidal component must be accounted for when estimating load requirements and sizing transformers that supply power to large nonlinear devices. The more harmonic distortion present in the system, the more non-sinusoidal the load current.

Interaction of fundamental frequency and harmonics creates resultant non-sinusoidal waveform

How Do Harmonics Affect Transformers

Transformers are typically built for usual service conditions unless specified otherwise by the customer. Applications with a significant amount of non-sinusoidal load current (or harmonic distortion), fall into the category of unusual service conditions. This non-sinusoidal component puts greater stress on conductor insulation and increases winding and core losses at the transformer, resulting in excessive heat levels and loss of power. The overheating effects of high-frequency harmonics are observed mainly at the coils, core, and neutral conductor of the transformer.

Higher frequency currents (like harmonics) naturally move toward the outside of the winding conductor, which causes an increase in resistance and heat. This principle is known as the skin effect. The densely packed construction of the coils also adds to heat build-up at the windings, and the end result is a reduction in the total current-carrying capacity of the transformer’s conductors.

Higher frequency harmonics can have adverse effects on a transformer’s core as well. In an AC circuit, the polarity of the magnetizing current in the core switches back and forth with the direction of the applied current. In other words, the rate at which the magnetizing current in the core changes polarity is driven by the frequency of the applied current. If the frequency of a standard AC power supply is doubled from 60 Hz to 120 Hz, then the magnetizing current in the core will go from switching polarity 60 times per second to 120 times per second. The higher the rate of change in the magnetizing current, the greater the amount of heat loss in the core. These additional losses are known as hysteresis losses.

Some losses in the core are inherent to the design of the transformer. Small pockets of swirling current, known as eddy currents, are another source of heat loss in transformers. Efficient laminated core designs (like those produced today) will minimize eddy currents as much as possible. While these undesirable phenomena are not a byproduct of harmonics, their negative effects are increased exponentially with the introduction of such higher frequency currents. The presence of higher harmonic frequencies multiplies an eddy current’s adverse heating effects several times that of the normal 60 Hz frequency. If a transformer’s core is not designed for such conditions, the resulting increase in the unit’s operating temperature could be detrimental.

The third most common area of overheating in the transformer is the neutral conductor on wye-connected windings. With wye-connected systems, triplen harmonics (3rd, 9th, 15th, and so on) will be present. These particular frequencies are most often seen where transformers serve large single-phase loads. Any triplen harmonics present in one or more phases of the system will add together at the neutral conductor. These harmonics crowd together in the neutral and reduce its current-carrying capacity. If the amount of triplen harmonics is high enough, the neutral conductor will overheat and its insulation system will fail. For such cases, an oversized neutral is generally used.

Which Transformer Design Should You Choose for Systems with Harmonics?

Determining the level of harmonic content in an electrical system is the first step in selecting the correct transformer for a project where harmonics may pose a significant concern. There are electrical industry guides that define the maximum level of harmonic content (or distortion) allowed for transformers designed for usual service conditions (see IEEE 519). As a general rule of thumb, if the total harmonic distortion (THD) in the system is above 5%, you will need 1) a transformer built to handle the harmonic content or 2) a means of mitigating the presence of harmonics at the transformer. Below, we’ve outlined the available options for both solutions.

1. K-factor rated transformers

Most often referred to as drive-isolation transformers (because they’re used in applications with motor drives like VFDs), K-factor rated transformers are built to handle the additional stress imposed by harmonics. K-factor rated transformers do not filter or mitigate harmonic distortion, they simply withstand it. Think of a transformer with a K-factor like a punching bag—the bigger and heavier the bag, the more hits it will be able to withstand. In a similar way, the higher the K-factor rating on a transformer, the more harmonic distortion it will be able to handle.

A transformer built for usual service conditions has a K-1 rating (a K-factor of 1 means there is no harmonic distortion in the system). K-factor ratings go all the way up to 50, but it’s rare to see anything above K-20 in the commercial and industrial market. For most harmonic profiles, a K-4 rated unit is sufficient. K-factor rated units include a 200% rated neutral conductor for handling the addition of triplen harmonics (see page 3 of this paper for a more detailed description of triplen harmonics), as well as an electrostatic shield between the HV and LV windings. In addition to harmonics, the switching function of non-linear devices also produces potential switching transients (common in solar inverters), which can lead to voltage distortion on the load side and high-voltage spikes on the supply side of the transformer. An electrostatic shield reduces these power quality issues.

2. Zigzag transformers

Harmonic-mitigating (or zigzag) transformers (HMTs) do exactly what their name suggests: reduce the presence of harmonic currents in an electrical system. Unlike units designed with a K-factor rating, HMTs filter a portion of the harmonic content. The installation of a stand-alone HMT will reduce the amount of triplen harmonics (3rd, 9th, 15, etc.) present in a circuit. Installing an additional HMT on the same circuit with a -30 degree phase shift (when the first unit has a 0-degree phase shift, or vice versa) can further reduce the amount of 5th and 7th harmonics. This dual-unit phase shift method can also be accomplished with standard delta-wye transformers, but a zigzag winding offers a more economic solution. HMTs are generally used for systems that operate several non-linear loads.

3. Passive Harmonic Filters

In addition to K-factor rated and harmonic-mitigating transformers, Maddox also offers a passive harmonic filter, a combination of capacitors and reactors. A passive harmonic filter is used to reduce the harmonic current flowing through the main circuit pathway. It accomplishes this by providing a lower impedance path for the harmonic current to travel—the harmonic current is diverted away from the system’s bus, which, in turn, lowers the circuit impedance. Passive harmonic filters can be tuned for one or more particular harmonic frequencies in a given system, making them a more versatile solution than the HMT. Higher K-ratings for larger transformers can significantly increase the cost of a unit, so the passive harmonic filter may provide a more cost-effective solution. Diverting the harmonic current in the system away from the main current-carrying pathway allows for the installation of standard equipment throughout the circuit (including the distribution transformer).

4. Delta-wye transformers

For systems where only triplen harmonics are present, a standard delta-wye transformer may be a sufficient solution. As mentioned earlier, triplen harmonics often cause problems for the neutral conductor, but when a delta winding is present on the primary side of a two-winding transformer, the triplen harmonics will circulate inside the delta winding instead of the neutral conductor. If a study of the harmonic profile of a system shows that only 3rd, 9th, or 15th harmonics are significantly present, a standard delta-wye transformer will be a sufficient solution. A delta-wye transformer also eliminates the problem of zero sequence currents, which are characteristic of wye-wye connected windings. For this reason, delta-wye winding configurations are often favored for applications where the load may be unbalanced.

5. Oversizing standard distribution transformers

Another way to account for harmonic distortion in a system is to simply oversize the kVA of a standard transformer design. This is a quick and easy solution when it is not feasible to wait for a custom-built transformer from the factory with a designated K rating. For applications where the THD is minimal (K-4, for instance), a simple oversizing of the kVA—or establishing a derating factor—may work just fine.

Oversizing the transformer kVA will increase the size of the core, windings, and neutral conductor. If the harmonic content in a system reduces the capacity of the transformer by 20%, then the unit will need to be oversized accordingly. For example, if a 1,000 kVA transformer is only good for 80% of its nameplate rating, the derating factor would require oversizing the unit to at least 1,200 kVA. Applying a derating factor is more common with liquid-filled transformers, which are naturally better suited for handling harmonic distortion than dry-types. It’s more common to see harmonic distortion handled with K-factor ratings in dry-type transformers.

It is key to note there are certain special design considerations made when building K-rated transformers which are not included with standard designs, such as the electrostatic shield and 200% rated neutral. Also, K-rated transformers sometimes include specially shaped winding conductors to reduce the increase in heat and resistance from harmonics. If triplen harmonics can be effectively mitigated at the transformer with a delta winding (negating the need for the larger 200% rated neutral), and if there is no need for electrostatic shielding, applying a derating factor and oversizing the distribution transformer can be a simple and effective solution. For more information on this method, take a look at this article on sizing transformers for crypto mining.

We’re Here to Help

The topic of harmonics will continue to require attention wherever electronic innovation and non-linear loads make up a significant portion of the demand in electrical circuits. Without proper counter-measures, harmonic distortion can lead to costly repairs and replacement. Our goal at Maddox is to meet these growing demands in the electrical industry with transformers designed and built for such applications, ensuring peak performance and longevity of service on every project.

Maddox offers all five of the above solutions to ensure that you have access to the equipment you need, when you need it. If you have questions about harmonics or want to request a quote for a Maddox transformer, fill out the form below or give us a call at 1-800-270-2011.

?

A Maddox Padmount transformer loaded on a truck and shipping out

Get in touch

Find out how Maddox can power on your next project.
Thank you!
Your submission has been received!
Oops! Something went wrong while submitting the form.
roa胎位是什么意思 苹果6和苹果6S有什么区别 吃牛肉有什么好处 什么是熊猫血型 妇科tct检查什么
怀孕后乳房有什么变化 取缔役什么意思 什么是卵巢囊肿 1996年是属什么生肖 太阳是一颗什么星
有机和无机是什么意思 手心脱皮是什么原因 眼睛充血用什么眼药水好 长痘吃什么水果 尿酸高去医院挂什么科
肚脐眼上面疼是什么原因 一什么石头 嘴唇发黑是什么原因引起的 女人要矜持是什么意思 cyan是什么颜色
炎性肉芽肿是什么意思hcv7jop9ns7r.cn 阿莫西林和头孢有什么区别hcv8jop7ns9r.cn 谷草转氨酶偏低是什么原因hcv8jop0ns8r.cn 解说是什么意思hkuteam.com 什么宽带网速快又便宜hcv9jop0ns6r.cn
喝什么降尿酸hcv9jop6ns3r.cn 七夕节什么时候zhiyanzhang.com 宫外孕是什么意思hcv8jop8ns6r.cn 现在什么节气hcv8jop0ns2r.cn 诺如病毒吃什么药好得快一点tiangongnft.com
叶什么什么龙onlinewuye.com 装模作样是什么生肖hanqikai.com 什么手sscsqa.com msgm是什么品牌hcv8jop1ns9r.cn 梦见种树是什么兆头hcv9jop1ns2r.cn
类似蜈蚣的虫子叫什么hanqikai.com 什么叫做焦虑症hcv8jop3ns3r.cn cdfi可见血流信号是什么意思hcv8jop9ns8r.cn 日加华读什么hcv8jop1ns7r.cn 三月份生日是什么星座hcv8jop9ns7r.cn
百度